Solar Mounting Systems
Flat Rooftop
Elevated, single-row portrait, single-row landscape, and east-west flat rooftop mounting systems for commercial and industrial buildings across the UAE and GCC.
About Flat Rooftop Systems
SolarShade flat rooftop systems are designed for concrete and membrane roofs where ballasted or mechanically fixed mounting is required. Available configurations include elevated tilted arrays, single-row portrait, single-row landscape, and the space-efficient east-west layout that doubles panel density per square metre.
All systems are engineered to minimise roof loading while meeting local wind uplift requirements. The modular aluminium profiles allow rapid on-site assembly, and the ballast-free mechanical fixing option is available where roof loading is a constraint.
Flat rooftop systems are among the most common installation types in the UAE and GCC, where commercial and industrial buildings typically feature flat concrete roofs. SolarShade flat rooftop systems have been installed on warehouses, factories, and commercial buildings in Dubai, Ras Al Khaimah, Dammam, and Khobar.
Frequently Asked Questions
- Are the flat rooftop systems ballasted or mechanically fixed?
- Both options are available. Ballasted systems use concrete blocks to hold the structure in place without roof penetrations. Mechanically fixed systems are anchored directly to the roof structure and are used where roof loading limits the use of ballast.
- What is the standard tilt angle for flat rooftop systems?
- Tilt angles typically range from 5° to 15° depending on system type and energy yield requirements. The east-west configuration uses a lower tilt angle to maximise panel density.
- Can east-west systems increase energy yield on a flat roof?
- Yes. East-west configurations allow higher module density per square metre and produce more consistent generation across the day compared to south-facing arrays. This makes them well suited to large flat roofs where maximising installed capacity is a priority.